+86-510-83380342

Structure on Round feeders

Mar 10, 2021

Round feeder is composed of round plate, guide sleeve and scrapers. Inside the hopper ,materials are discharged out by the scraper . To adjust the scraper’s height or the guide sleeve’s height can change the feeding rate .Usually the round diameter is below 3m ,the speed is less than 10rpm. Round feeder running is safe and reliable,easy to adjust the feeding rate ,low consumption. However,its structure is more heavier,suitable for the little sticky powder or granules. Some feeders are composed of shell and vane wheels. The shell’s upper and lower inlet and outlet are connected with hopper and downstream equipment .When vane wheel rotate around the horizontal shaft ,materials are dropping inside each cavity. Along with the vane rotating ,materials are dropped into the downstream equipment. The vane wheel diameter is below 500mm, speed is less than 45rpm. Such feeder’s has simple structure,dimension is small ,light ,good sealing ,suitable for small particles‘s feeding .

1

https://www.wxconveyor.com/

Send Inquiry