During transportation and storage, the conveyor belt should be kept clean and protected from direct sunlight or rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, and should be kept one meter away from heating devices.
During storage, the warehouse temperature should be maintained between 18-40°C, and the relative humidity should be maintained between 50-80%.
During storage, the conveyor belt must be placed in rolls and must not be folded. During storage, it should be turned once a quarter.
Conveyor belts of different types and specifications should not be connected together. It is best to use glue joints for their joints.
The type, structure, specifications and number of layers of the conveyor belt should be reasonably selected according to the conditions of use.
The running speed of the conveyor belt should generally not be greater than 2.5 meters/second. For materials with large lumps and abrasiveness and the use of fixed unloading devices, the speed should be as low as possible.
The relationship between the diameter of the conveyor's transmission roller and the conveyor belt fabric layer, the matching of the transmission roller and the reversing roller, and the requirements for the roller groove angle should be reasonably selected according to the design regulations of the conveyor.
The feeding direction should be along the running direction of the conveyor belt. In order to reduce the impact of the material on the conveyor belt when the material falls, a chute should be used to reduce the falling distance of the material; the distance between the rollers should be shortened in the receiving section of the conveyor belt and buffer rollers should be used to prevent material leakage. , the belt should adopt a soft and moderate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the conveyor belt.
https://www.wxconveyor.com/