Hollow Shaft Cooling Conveyor
Wuxi Changrong Conveying Machinery Co., Ltd. is one of the most reliable manufacturers and suppliers of hollow shaft cooling conveyor in China, also supports custom service. With abundant experience, we warmly welcome you to buy advanced hollow shaft cooling conveyor at competitive price from our factory.
Introduction
Hollow shaft cooling conveyor is designed and fabricated to transport and cool chemical fertilizer with a bulk density of 1063kg/m3,approximate mass flow rate of 30 tons/hour to 75tons/hour over a distance of 11520mm.During transporting ,it also need be cooling . The Hollow Spiral Cooling Conveyor medium is cooling water with some chemical substance . Cooling medium are filled up in the cooling jacket ,hollow shaft as well as screw flight . Screw flight are hollow and continuous welding type.
Our engineering team and fabrication team :

General Requirements
1.Materials of Construction
316L stainless steel construction for all wetted parts – augers/screw shafts, trough, cooling jacket and cover.
16Mn construction materials for shaft head .
2.Augers/screw shafts
No hanger bearings.
Screw shafts/Augers are Ø660mm *t16mm,hollow pipe .
Auger flights diameter 1250mm ,thickness is 10mm.
3.Auger flights to be continuously welded on both sides.
Screw pitch is progressive 450-600mm.
Cooling temperature from 130 degrees Celsius to 81 degrees Celsius.
4.The outer shell is trough which is made of stainless steel 316L, welding pipe size is ø660mm *16mm .

The Hollow Cooling Screw Conveyor is composed of the drive device, the inlet and outlet port and the screw machine body. The screw machine body is composed of head and tail bearing, hollow cooling screw shaft, casing/shell jacket ,etc . The drive device consists of a SEW motor &gearbox seat. Its working principle is: the screw shaft rotation in the trough, the loose material into the trough with the flight in the trough is blocked by the friction wall, in operation, the flight push the material for axial movement, at the same time the material and the hollow cooling screw shaft with screw flight contact heat exchange, after cooling the material can be output from the trough from the end of the trough. Cooling screw conveyor has the advantages of simple structure, excellent material temperature control, wide operating temperature range, good cooling effect, safe and convenient operation, good sealing performance, environmental protection and so on. Bearing PT100 temperature sensor(with built-in transmitter), output 4-20mA signal; Install a blockage detection switch above the discharge port to detect whether the conveyor is blocked; Rotation detection or speed sensors are used to detect the speed of the conveyor, and the PNP output signal will provide a corresponding signal if the speed is abnormal.With 1 piece of floor mounted vertical control cabinet ,non-explosive proof type ,made of stainless steel 304,including a unit of Mitsubishi frequency inverter,1 unit of schneider electrical elements,2 pcs of Chinese brand temperature measuring instrument,1 piece of PLC with communication module RS485,it is mainly used for starting and stopping of cooling conveyors .
1.A general view of cooling screw conveyor before delivery .
2.Inlet's view of screw flights
3.Hollow shaft cooling screw conveyor is ready for inspection by the buyer .
4.If the buyer will not witness the empty running test ,we will send the inspection records and empty running test video to them for check .After passing inspection ,we will deliver hollow cooling screw conveyor promptly.

technical data
|
Product name |
Cooling |
At buyer's choice |
|
Screw flight |
Ø1250mm |
|
|
Screw flight pitch |
variable |
|
|
Screw flight thickness |
10mm |
|
|
Screw center shaft |
Ø660*16mm |
|
|
Screw conveyor's length |
11500mm |
|
|
Drive system |
90KW at 21rpm |
|
|
Drive direction |
Gearbox model : X3KS200e/HH/B,motor model is EDRN280M4/TF Frequency motor ( frequency ranges from 5-50HZ) ,protection class is IP55,F grade . Based on our experience, variable frequency motors are usually guaranteed to operate at a frequency above 15Hz.Speed ratio is 70.26 |
|
|
Screw conveyor's inclination |
70,Incline |
|
|
Surface treatment |
Internal polished Ra≤0.8um,external pickling passivation |
|
|
Static load |
42000kgs |
|
|
Packing size |
15500mm*1890mm*2300mm( we dismantle the motor from conveyor during shipping ) |
|
|
Packing type |
By shrink film with steel frame or pallet ( or as per buyer's advice) |
|
|
Manufacturing time |
150 days after down payment |
|
|
Payment term |
50% prepaid by T/T,50% shall be balanced before delivery |
|
|
Warranty period |
12 months after start up on site or 18 months after delivery ,whichever occurs first |
|
|
Site service |
We can send technicians to site if necessary |
Inspection Request Photos
Hollow Shaft Cooling Conveyor's Inspection Request
We have our own inspection test plan for each conveyor . Each conveyor will be under checked strictly and sucessfully tested before delivery . This screw shaft is under making tolerance of shaft head .
Also we have our own welding programs by WPS and PQR.
Sometimes ,the buyer will have strict inspection on welding . We can provide the welding inspection by RT,PT or something else ,which can meet the buyer requirements . All welding are 100% visually inspected during the fabrication stage .
Look at the below pictures : we are making PTtest to check the welding .
Hollow Shaft Cooling Conveyor's FAT
Before delivery ,the client reached our workshop to witness the empty running test .
Hollow Shaft Cooling Conveyor's Packing and Shipping
Packing photos : shrink film + net
Shipping photos

How to get a correct customized design and quotation
Send us the following information :
Transporting length. L= ____m
Transporting inclination degree . = ____00 ( inclination is from 10 to 900)
Transporting capacity = ___m3/hour
Transporting is continuous or not
What is kind of materials to be transported ? powder,particle or something else. Provide the materials' bulk density,flow ability,moisture,etc
Screw conveyor is made of stainless steel or carbon steel
Voltage at your location .in China,it is 380V,50HZ,3PH
How to get chance to visit factory in China
We welcome you to visit our factory in wuxi .You can choose the following ways to contact us :
If you are in abroad :
By airplane to Shanghai or Wuxi . We can pick you up from airport,or you can take taxi to our workshop directly .
If you are in China
By high speed train to wuxi station or huishan station ,we can pick you up from station .
By car to our workshop directly .
Contact online by phone or wechat or whatsapp :
You are welcomed to contact Ms Annabel Lin who is a hard working lady with high efficiency. You can contact her by following steps:
a.Contact skype ID : annabel.lin88
b.Give a call to Annabel directly : mobile phone is 86 150 618 14689.office phone is 86 510 8338 0342
c.Send e-mail to changrong@changrong-jx.com
d.Add wechat ID : Lin_Annabel
e.Whatsapp ID : 86 150 618 14689
Annabel Lin is responsible for foreign business in Wuxi Changrong Conveying Machinery Co., Ltd since 2011.With her efforts together with her team ,Wuxi Changrong has provided many conveying equipment to Russia,USA,Mexico, Japan,Czech,Lithuania,Zambia,Algeria,Malaysia,Singapore,etc.

Hot Tags: hollow shaft cooling conveyor, China, manufacturers, suppliers, factory, price, custom, screw conveyor grain, Conveyors, Oem Screw Conveyor Shaft, elevator conveyor, Oem Incline Conveyor Systems, conveyor mfg
Send Inquiry

