
This silo locates on the top of twin screw conveyors.There is a tubular screw conveyor which cross the silo.They are used to transport quick lime/calcium lime.The working capacity is 2m3/h.Its technical data form is as below:
Technical data form on the tubular screw conveyor | |||
Screw Diameter | 187 mm | Geared motor | R97 |
Screw Pitch | 150 mm | Power | 4kw * 1 set of motors,motor is frequency type |
Screw fight thickness | 4mm | Screw center shaft | ø108*6mm |
Substance | CaCO3,Ca(OH2) | Protection class | IP55 |
Subtance bulk density | 0.75t/m3 | Insulation grade | F |
Feed rate | 2m3/h | Voltage | 380V,50HZ,3PH |
Inclination | 0 degree,horizotal transporting | Speed on screw shaft | 31rpm |
Construction amterials | Carbon steel by painting | ||
Surface treatment | Sand blasting + painting. | ||
On 22nd November,Wuxi Changrong received call from the site that there existed some vibrating on the tubular screw conveyors .Wuxi Changrong checked with the site ,then send technician to site for solve this problem.

This is the site factory gate.
You will see some materials were outsite.

After checking and and analysis on the problems which were caused by the discharging outlets were blocking there and the inlet’s support legs are too short . Wuxi Changrong ‘s technician cut the discharging outlet to the suitable distance and increased the height of support leg. In this way ,he solved the vibrating problem sucessfully .

The bottom twin screw shafted conveyors works well.

