Such feeding screw feeders are used to transport sticky fine sand with salt waste products indoors. The environment is very humidity and corrosive,so the stainelss steel must be duplex type.
Changrong choose duplex 2205 to make such screw conveyors.
Screw conveyors’ design running environment and engineering condition
1. Weather condition
Ø Annual average temperature:17.40C
Ø High temperature : 40.30C
Ø Low temperature : -100C
2. Running environment
Ø Environment temperature : 6~650C
Ø Relative humidity :78%
Ø Working ways : continuous,300Bd/a
Ø Indoor : Under the hopper and upper the big incline belt conveyor
Technical Specification | Equipment usage :applied in pyrolysis hooper feeding materials into big incline belt conveyor |
Equipment type : shafted screw conveyor | |
Model and size : Conveying capacity : Q>20 tons/hour,horizontal. | |
Transported materials’ feature : Sticky fine sand waste salt,ATM | |
Feeding inlet size : 500*3000mm and connection to the hopper | |
Discharging outlet size : 400*400mm and connection to the inlet of big incline belt conveyor | |
Can switch control between onsite | |
Construction material : duplex stainess steel 2205 | |
Feeding screw conveyor’s signal can be reached into DCS system by hard connection wire | |
Supply Scope | 1. One complete set of screw conveyor |
2. Motor &Gearbox,motor is explosive proof type | |
3. Mounting base and anchor bolt and adjusting mats | |
4. Site control cabinet,stainless teel 304,thickness 1.5mm |
Working environment : indoor,dust,high temperature,environment temperature ranges from -10 to 400C.
Meteorological and geological conditions : 1.Atmospheric pressure in Summer : 10000.9hPa, 10002.1hPa in Winter.
Earthquake intensity : 6 grade
Technical Data | ||
Screw diameter | 500mm | Gearbox & Motor Data |
Screw pitch | 350-450mm | Model : R107-47.63-31RPM |
Substance | Sticky fine sand with salt waste | Power : 11KW,motor is EXTDA21,B5 |
Feeding Rate | >20ton/hour | Power Supply : 380V,3PH,50HZ |
Screw Cover thickness | 4mm | |
Screw center shaft | Ø219*8 | |
Screw chamer | 6mm | |
Conveying distance | 5300mm,5800mm | |
Surface treatment | Acid clean or sand blasting | |
A simple sketch is for a view :
www.wxconveyor.com
