1. Installation and debugging
Install the conveyor correctly according to the site and conveying requirements. Ensure that all parts of the conveyor are firmly installed, such as the frame, drive device, conveyor belt (or chain, spiral blade, etc.).
Before debugging, check whether the electrical connections are correct and whether the transmission parts are well lubricated.
Start the conveyor without load, observe the running condition, and check for abnormal noise, vibration or deviation. If there is any problem, adjust and repair it in time.
2. Preparation before operation
Check the conveyed materials to ensure that they meet the conveying requirements of the conveyor. For example, the size, shape, humidity, etc. of the materials should not exceed the bearing range of the conveyor.
Clean up the debris around the conveyor and keep the working environment clean and tidy.
Check whether the safety devices are intact, such as guardrails, emergency stop buttons, etc.
3. Startup and operation
Start the drive devices in sequence according to the operating procedures. During the startup process, pay attention to the startup of the conveyor to ensure a smooth startup.
When the conveyor is running normally, place the materials evenly on the conveyor belt (or put them into the corresponding conveying parts). Avoid putting too much materials at one time to avoid blockage or overloading.
During operation, always pay attention to the running status of the conveyor. Observe whether the conveyor belt (or chain, spiral blade, etc.) runs smoothly, and whether there is deviation, slippage, jumping, etc. If there is any abnormality, stop the machine immediately for inspection.
Pay attention to the conveying of materials to ensure that the materials do not scatter or accumulate during the conveying process. For materials that are easy to scatter, consider adding protective devices.
4. Shutdown and maintenance
When the conveying task is completed, the material feeding should be stopped first, and the conveyor should be stopped after all the materials on the conveyor belt have been conveyed.
After the machine is shut down, clean and maintain the conveyor. Clean the residual materials on the conveyor belt, check the wear of each component, and replace the damaged components in time.
Regularly perform maintenance work such as lubrication and tightening on the conveyor to extend the service life of the conveyor.
Keep daily inspection records of the conveyor so that problems can be discovered and dealt with in a timely manner.
Correct use of the conveyor requires strict operation in accordance with the operating procedures, and attention should be paid to installation and commissioning, daily maintenance and safety management to ensure stable operation and efficient transportation of the conveyor.
If you want to know how to use the conveyor machine, welcome to visit www.wxconveyor.com !
