the screw conveyor has been used for a period of time, regularly check whether all bolts are loose. If they are loose, they must be tightened immediately. Check the oil level and color of the oil in the reduction box. If the oil is insufficient, add oil immediately. Check the axial direction of the screw due to fatigue. Extend, check the wear of the lining, check the electronic control system and safety device, etc. If the equipment is found to be abnormally worn, it must be repaired immediately.
For spiral screw conveyors without a central shaft, the spiral blades are always in contact with the surface of the water tank, so the surface of the water tank is covered with a layer of wear-resistant lining. If the wear-resistant lining is found to be damaged, it should be replaced immediately. Follow the steps below.
1. Remove the two tightening caps and the flange screws connecting the reducer and the bearing seat to separate the transmission mechanism.
2. Remove the screws connecting the bearing seat and the machine body, and remove the bearing seat, bearing and seal seat.
3. Take out the spiral body.
4. Remove all pressure plate screws of the bushing and remove the bushing.
5. Replace with new bushing.
The working principle of the screw conveyor is simple. When it works, it relies on the driving force of the spiral blades to smoothly transport the product to the designated location. Therefore, the emergence of the screw conveyor has brought convenience to people's production and life. It is also highly efficient. Energy saving features. Screw conveyor products are carefully manufactured for you by drawing on the advanced technical experience of similar foreign products, constantly innovating and improving on the original basis.
https://www.wxconveyor.com/