pipe chain conveyor chain breakage generally include the following situations:
1. The designer's calculation error or selection error makes the chain used in the conveyor unable to meet the working tension during normal working hours.
2. The manufacturing quality of the chain does not meet the design requirements, and the allowable load is smaller than the selected value.
3. The pin on the chain was damaged and was not replaced in time, causing the connecting pin to fall and cause the chain to break.
4. The transportation materials are mixed with large hard blocks or iron, and the chain suddenly gets stuck, causing the chain to break due to overload during operation.
5. If the whole machine is installed carelessly or due to vibration and impact, the connecting flange and guide rail in the middle of the casing may move up, down, left and right, causing the chain to get stuck, overloaded and broken.
https://www.wxconveyor.com/