The vibrating conveyor is a long-distance conveying device with a wind lock function. It is suitable for conveying all kinds of medium-sized block materials with positive and negative bulk materials and horizontally conveying high-temperature and high-abrasion materials. It is very suitable for cement shaft kilns. Under the material sealing machine.
Two vibrating motors are used as the vibrating source in the vibratory conveyor. The self-synchronizing principle is adopted. The two vibrating motors rotate in the opposite direction, causing the bottom balancer of the conveyor to oscillate back and forth. After the main vibrating spring and the guide leaf spring act, the upper conveyor is driven. Groove vibration, so as to achieve the purpose of conveying materials. In addition to the cement industry, it can also be used in metallurgy, mining, chemical, power and other industries.
The conveyor belt is one of the main parts of the vibrating conveyor. Its use, maintenance and maintenance cannot be ignored. When using it, you must not use different types and sizes of belts together; and before use The first empty machine is started to avoid overloading of the motor and slippage of the conveyor belt. All the materials of the belt should be unloaded before stopping.
In the transmission of vibrating conveyor, it is necessary to adjust the conveyor belt in time to avoid running or running. At the same time, it is also necessary to prevent the folding and hard objects from being pressed. The direction of the material to be transported and the speed of the material falling must be consistent with the direction and speed of the belt. .
When using a vibrating conveyor conveyor belt, the tension should not be too large, but must work under the condition of minimum tension under the premise that the drive roller does not slip and the material does not transition. Also pay attention to adjust the tension system to keep the elastic device flexible.