Home > News > Content
OUR COOLING SCREW CONVEYOR WERE PASSED INSPECTION BY CUSTOMERS FROM ITALY
Dec 13, 2017

From 11th to 12th December, our cooling screw conveyors ,buffer tanks, hoppers,rotary feeders were under inspection by customers from Italy.

图片1.jpg

These cooling screw conveyors are designed to convey and cool materials from high temperature to low temperature .Changrong designed them by tube or pipe shape with cooling jacket .Because tube or pipe screw conveyor has better sealing effect than U shape or V shape .

图片2.jpg

Meantime ,Changrong designed the air sealing for each cooling screw conveyors.

In order to prevent any materials from blocking inside the trough ,Changrong designed the level meter which can reach inside the trough .If materials blocking,the level meter will give alarm signal ,then relative personnel can find and solve the problem immediately .


Customers measured size on flanges,length,inlet size,etc.

图片3.jpg

Due to the conveyed materials are very special ,it required the inside must be polished .Polished effect is as below :

图片4.jpg

Customers checked the surface finish quality by instrument .

图片5.jpg

Checked the casing thickness 

图片6.jpg

Explosive proof control cabinet for each cooling screw conveyor :

图片7.jpg

Finally ,all jacket cooling screw conveyor were passed inspection .Changrong will pack and deliver these conveyors soon .http://www.wxconveyor.com/

图片8.jpg

Products List